All Blocks

The first decision to make is whether you need a high ply or a low ply cutter. Aeronaut only makes low ply and single ply cutters. As a generalisation, high ply cutters are used for high volume, low cost goods such as garments and upholstery where high accuracy is not required.

Low and single ply cutters are used for high-value, lower volume goods where greater cutting accuracy is needed. Low ply cutters can perform tasks such as marking, creasing, scoring, sanding and buffing which are not possible with high ply cutters or conveyor tables.

Low ply cutters are actually used for both low and high volume production, but are perhaps more suited to industries where high accuracy is required, and short runs, just-in-time production or one-offs are made.Our customers do cut multiple layers where the job demands it, but typically, most Aeronaut cutters only cut one layer of material at a time, which can be up to 20 mm in thickness.

The first decision to make is whether you need a high ply or a low ply cutter. Aeronaut only makes low ply and single ply cutters. As a generalisation, high ply cutters are used for high volume, low cost goods such as garments and upholstery where high accuracy is not required. Low and single ply cutters are used for high-value, lower volume goods where greater cutting accuracy is needed. Low ply cutters can perform tasks such as marking, creasing, scoring, sanding and buffing which are not possible with high ply cutters or conveyor tables.

Low ply cutters are actually used for both low and high volume production, but are perhaps more suited to industries where high accuracy is required, and short runs, just-in-time production or one-offs are made.Our customers do cut multiple layers where the job demands it, but typically, most Aeronaut cutters only cut one layer of material at a time, which can be up to 20 mm in thickness.

The first decision to make is whether you need a high ply or a low ply cutter. Aeronaut only makes low ply and single ply cutters. As a generalisation, high ply cutters are used for high volume, low cost goods such as garments and upholstery where high accuracy is not required. Low and single ply cutters are used for high-value, lower volume goods where greater cutting accuracy is needed. Low ply cutters can perform tasks such as marking, creasing, scoring, sanding and buffing which are not possible with high ply cutters or conveyor tables.

Low ply cutters are actually used for both low and high volume production, but are perhaps more suited to industries where high accuracy is required, and short runs, just-in-time production or one-offs are made.Our customers do cut multiple layers where the job demands it, but typically, most Aeronaut cutters only cut one layer of material at a time, which can be up to 20 mm in thickness.

The first decision to make is whether you need a high ply or a low ply cutter. Aeronaut only makes low ply and single ply cutters. As a generalisation, high ply cutters are used for high volume, low cost goods such as garments and upholstery where high accuracy is not required. Low and single ply cutters are used for high-value, lower volume goods where greater cutting accuracy is needed. Low ply cutters can perform tasks such as marking, creasing, scoring, sanding and buffing which are not possible with high ply cutters or conveyor tables.

Low ply cutters are actually used for both low and high volume production, but are perhaps more suited to industries where high accuracy is required, and short runs, just-in-time production or one-offs are made.Our customers do cut multiple layers where the job demands it, but typically, most Aeronaut cutters only cut one layer of material at a time, which can be up to 20 mm in thickness.

The first decision to make is whether you need a high ply or a low ply cutter. Aeronaut only makes low ply and single ply cutters. As a generalisation, high ply cutters are used for high volume, low cost goods such as garments and upholstery where high accuracy is not required. Low and single ply cutters are used for high-value, lower volume goods where greater cutting accuracy is needed. Low ply cutters can perform tasks such as marking, creasing, scoring, sanding and buffing which are not possible with high ply cutters or conveyor tables.

Low ply cutters are actually used for both low and high volume production, but are perhaps more suited to industries where high accuracy is required, and short runs, just-in-time production or one-offs are made.Our customers do cut multiple layers where the job demands it, but typically, most Aeronaut cutters only cut one layer of material at a time, which can be up to 20 mm in thickness.