You can buy an automated cutting system from a number of companies. Some cost more than an Aeronaut machine, and others cost less. So why should you choose an Aeronaut cutter over these lesser machines?
Industrial strength machines for working with industrial and recreational textiles.
Aeronaut began manufacturing machines for work with industrial and recreational textiles, not garment fabrics. In the first batch of 6 machines which we made, two were over 4 metres wide. Compare this with some other manufacturers who talk about “an impressive 72″ wide…” and you may start to notice the difference.
We know how to cut with scissors and run a sewing machine.
Unlike many companies who manufacture automated cutters, Aeronaut’s background is as a user. At least two of our people can drive an industrial sewing machine and have done their time with a pair of scissors on the floor. So all Aeronaut machines are aimed square at the user rather than being just an engineer’s or programmer’s solution to a marketing problem.
A Wide Product Range
You might be hard-put to find another manufacturer with the product range offered by Aeronaut. When you buy an Aeronaut cutter, you are getting one of a family of machines which can use some very different cutting technologies including blade, laser, crush and ultrasonic. And you can have a machine which combines more than one of these technologies in a single machine.
Rational Engineering
Fortunately, Aeronaut Automation began with a few metal working machines in the spare bedroom, and the first few machines we made were sent thousands of kilometres away.
Spare Parts
We’d rather your machine was working 100% all of the time than make a few dollars on a spare part, so we don’t scratch off or hide part numbers or paint over them as we’ve seen on other manufacturer’s machines.
The Fishbowl
Sooner or later, even the best machines will need some service or technical support. At Aeronaut, we have the “fishbowl.” Our programmers, service technicians and production manager are all in the same room, complete with a small test cutter.
Aeronaut distributors
Aeronaut has distributors in most parts of the world, and in most time zones. These companies are carefully chosen to fit with the Aeronaut philosophy. Most are technically orientated rather than sales orientated.
Most of their technical staff will have been trained at the factory in Australia or by Aeronaut technicians. As a result, Aeronaut distributors are very well qualified to sell, service and support Aeronaut machines and software.
Innovation
The world is changing at an increasingly rapid rate and fabricators need to move with these changes. Your equipment needs to be designed to let you do the work you have to do
- Bayonet mounted top loading quick-change tooling
- Cam-lock quick change tooling
- Drill punch tools with rod ejectors up to 20mm
- Air cooled laser cutters
- High power water cooled laser cutters
- Laser cutters with built-in blade cutting
- Ultrasonic tooling
We’ve worked with Aeronaut for over 24 years and have seen our capabilities grow alongside that time. We started with a single 20m x 4m plotting table, then added a second table as demand increased.
Explore Aeronaut
Your industry meets our expertise. Our technology meets your goals.
In almost three decades, we’ve worked alongside fabricators here and abroad, and there’s nothing I enjoy more than helping a growing business find the right solution.